Adhesive Towel Ring 361006

Adhesive towel ring can be mounted on any flat ,hard ,no ash wall surface in bathroom or kitchen, just take off the protected film on the back of towel ring , then stick this adhesive towel holder .

Inquiry Now

I'm not a robot: captcha

Your message will be replied within 12 hours , All information will be protected !

SKU: 361006 Category:
General Details

Adhesive towel ring can be mounted on any flat ,hard ,no ash wall surface in bathroom or kitchen, just take off the protected film on the back of towel ring , then stick this adhesive towel holder .

Not like old adhesive tape you may bought , the VHB self adhesive from 3M or Avery , it is easy to stick on wall , but more important thing is it can be remove without any remain .

The stainless steel wire ring can be hold towel on wall easily and firmly .

The recommended weight of this self adhesive towel ring is below 3 Kilogram .

Features

  • No drilling and screws , tools required
  • Self  adhesive tape from 3M or Avery of USA
  • Eco plastic hooks in ABS
  • Stainless steel wire ring in electropolish
  • Easy to remove

Specification

  • Product size : 15 x 6.5 x 12 cm
  • H.S.code : 39249000
  • Self adhesive  VHB tape
  • Stainless steel wire ring
Packing Info

What’s in the box

  • towel ring with self adhesive tape : 1 piece

Packing info

Packing (1set/polybag/box, 12pcs/ctn) Load quantity
Inner Box Size: 11.5x7x15.8 cm 20’GP: 16656 pcs
Outer Carton Size: 33x25x24 cm 40’GP: 33936 pcs
N.W.: 1.6 kg/ctn G.W.: 2.8 kg/ctn 40’HQ: 39384 pcs
How to Affix

How to affix adhesive  accessories

Application for hard, flat surface without dust or ash.

adhesive fix 3 steps

Cautions:

  1. Put your matter after a 24-hour test to be sure it is a firm installation; the matter should below 3 kilograms.
  2. Not recommended for valuable and fragile matter (such as clock, camera, glass, jewels, etc.).
  3. Not recommended for rough surfaces; the performance will be faded if overloaded. Please mind safety during installation.
FAQ

Frequently Asked Questions

  • How to take it off from surfaces?

To take off adhesive accessories, please use a steel knife or a ruler, then insert into the space between the surface and the adhesive. Lever it up slightly and slowly. Be careful of your hand during the action .